Refrigeration equipment Korf KSA, KCR, HBA, HBE, KNC, etc.

Compressor and condenser units with axial fans consist of a compressor, a fan, a control unit and a refrigeration circuit.
Models: KSA 5-45, KSA 55-206D.

Compressor and condenser units with centrifugal fans consist of a compressor, a fan, a control unit and a refrigeration circuit.
Models: KCR 4-34 S/K, KCR 051-172 S/K.

Modular HBA air-cooled condenser chillers and their kits - smooth fan speed control guarantees stable operation of the chiller, as well as provides an extended range of ambient operating temperature by reducing its lower limit to +5 °C.
Models: HBA 039, HBA 048, HBA 054, HBA 064, HBA 072, HBA 079, HBA 096, HBA 107, HBA 128, HBA 145, HBA 163, HBA 190.

Modular HBE chillers for working with remote condensers and their kits - protection against freezing of the evaporator by means of an installed flow relay, choice of operating mode: according to the temperature of the incoming or outgoing coolant.
Models: HBE 039, HBE 048, HBE 054, HBE 064, HBE 072, HBE 079, HBE 096, HBE 107, HBE 128, HBE 145, HBE 163, HBE 190.

Remote capacitors for working with HBE chillers - economical and efficient operation under various environmental conditions.
Models: KNC 39, KNC 48, KNC 54, KNC 64x2, KNC 72x2, KNC 79x2, KNC 96x2, KNC 107x2, KNC 128x2, KNC 145x2, KNC 163x2, KNC 190x2

Condenser air-cooled chillers are a load-bearing housing made of galvanized steel with powder polyester coating.
Models: HWA/CL 4-20 S/K/P, HWA/WP 24-40 S/K/P, HWA/FC 24-40 S/K/P, HWA/FC 24-40 S/K/P, HWA/FC 051-172 S/K/P, HWR 4-34 S/K/P, HWR 051-172 S/K/P, LWA/WP 212-1102 S/K/P, LWA/FC 212-1102 S/K/P.

Condenser water-cooled chillers are a load-bearing housing made of galvanized steel with powder polyester coating.
Models: HWH 4-40 S/K/P, HWH 051-172 S/K/P, LWH 182-1602 VV/Z.

Chillers for working with remote condensers are a load-bearing housing made of galvanized steel with a powder polyester coating.
Models: HEE 4-40 S/K/P, HEE/WP 051-172 S/K/P, LEE 1452-2583 VV/Y.

Remote hydraulic modules are a bearing body made of peralumane and galvanized steel with powder polyester coating.
Models: KSM, UR 1500-2500.

The remote condenser consists of a vent and a heat exchanger.
Models: TRC 1111-3121 K, TRC 4251-5282 Y.

Draycoolers - Universal installation – it is possible to install the capacitor both vertically and horizontally (except models 5261-5282, mounted only with vertical air discharge).
Models: LRC 3121-5282.

Fan coils with centrifugal fans are used for heating or cooling the room and are a unit including a fan, a heat exchanger and an automation system.
Models: KVW/VP, KVW/VH, KVW/VE, KVW/VO, KIW/IV, KIW/IF, KIW/IO, KIW/II.

Cassette fan coils are used for heating or cooling the room and are a unit including a fan, a heat exchanger and an automation system.
Models: KSF 34KM, KSF 51KM, KSF 68KM, KSF 85KM, KSF 102KM, KSF 136KM, KSF 170KM, KSF 204KM, KSF 238KM.

Wall-mounted fan coils are the optimal choice for air conditioning in hotels, apartments, offices, shops.
Models: KHW 21, KHW 44, KHW 50.

Channel fan coils - low noise and minimal power consumption.
Models: BO, BI, Co.

• Technical characteristics of refrigeration equipment

Catalog